Hardware manicure has appeared relatively recently, but has already become quite popular, since it allows you to process nails without spending a lot of time and effort. This way of caring for your hands is one of the most gentle and harmless, if you follow all the rules and sequence of actions. Location: Location: Hardware manicure is performed only on dry hands. It is especially good for those with problem nails and the area around them. With the help of various attachments, you can correct the nail plate and gently remove the cuticles without cutting it off. Another advantage of hardware manicure is that when using the device, cuts, scratches and other damage to the skin are practically excluded.
Before doing a manicure, remove the remnants of the old polish and wash your hands. Then apply a cuticle softener available at your local specialty store. It will soften the dead skin around the nail, and it will be much easier to remove it without injury.
Place a fine abrasive needle on the machine. Treat the cuticle area, starting with the periungual ridges. The number of revolutions on the device should not exceed 12000. After processing the periungual rollers with the same nozzle, gently walk along the cuticle on the nail, lifting it. Try not to touch the nail so as not to leave furrows on it.
Remove the raised cuticle using the frusto-cone attachment. Hold the apparatus at a 45 degree angle to the nail surface. Be very careful and take your time, otherwise you can easily injure your skin. The number of revolutions for this stage should not exceed 10,000.
Sand the cuticles with a fine abrasive bullet nozzle. The number of revolutions is not higher than 12000. To do this, slide several times along the cut cuticle in the direction opposite to the rotation of the nozzle. Try not to press too hard, so as not to leave pits and grooves on the nail plate.
Apply special manicure oil to the treated area and let it absorb. After that, polish the nails with a regular soft nail file and adjust their shape.
Degrease your nails with a special tool and apply a base coat of polish. After that, apply regular varnish and a layer of acrylic.