❶ How To Sew A Women's Hat With Earflaps

Table of contents:

❶ How To Sew A Women's Hat With Earflaps
❶ How To Sew A Women's Hat With Earflaps

Video: ❶ How To Sew A Women's Hat With Earflaps

Video: ❶ How To Sew A Women's Hat With Earflaps
Video: Ear Flap Hat 2024, March
Anonim
How to sew a women's hat with earflaps
How to sew a women's hat with earflaps

Ushanka is a real salvation in a frosty and windy winter. But it can be not only practical, warm, but also very beautiful. Making a fur hat will require labor, but the result will reward and delight. Location: Location:

You will need

- pieces of fur;

- lining fabric;

- ribbons for strings;

- wooden or plywood board.

Sew a hat with ears from any fur at hand, an old collar, pieces of fur from obsolete fur will do.

Build patterns of parts from thick paper: cap, visor and ears. The hood will consist of two parts. For a cap (size - 56), draw a horizontal line 30.5 cm long, exactly in the middle, draw a perpendicular 14 cm high. Move 2 cm up (vertically) from the intersection of the two lines and draw another horizontal line 28.5 cm long so, so that it crosses the vertical exactly in the middle of its length.

Draw four more horizontal lines, the same spaced, stepping off 1.5 cm, 1.5 cm, 3 cm, 3 cm, 27 cm long, 25.8 cm, 22.5 cm, 17 cm. From the last point on the vertical, retreat up another three centimeters and put a point (top), then connect all the resulting points to the right and left with a smooth line with the top.

Mark the dart: set aside 4.5 cm upwards along the central vertical, 3 cm to the left and right of the center point along the bottom horizontal, connect the three points with straight lines.

five

Build an ear pattern: draw a horizontal line 13.5 cm long, divide it in half and draw a 12 cm perpendicular vertical from the center. Mark on the vertical, moving from bottom to top, 3 cm, 3 cm, 3 cm, 1.5 cm, 1, 5 cm. Set aside from these points the horizontal 12.6 cm, 11 cm, 9 cm, 7 cm so that the midpoints of these lines fall on the marked points, connect the resulting points.

Draw a visor pattern (the drawing will represent half of the detail): draw a rectangle with sides 13.5 cm and 11.5 cm. Set aside 3 cm, 3 cm, 3 cm and 2.5 cm on the smaller side, draw perpendiculars from these points to the opposite side. Set aside on these lines 0.5 cm, 2 cm, 3.5 cm, 11 cm, connect the resulting points with a smooth line (front line of the visor).

Set aside on the opposite smaller side of the rectangle 9.1 cm, then three times 0.8 cm each, draw perpendiculars from these points to the opposite side, set aside 7 cm on the second perpendicular, 10 cm on the third. Connect points 9.1 cm with dots 0.8 - 7 cm, 0.8 - 10 cm and a point of the opposite angle with a smooth line (back line of the visor).

Place the pattern pieces on the plywood and chalk around them. Pick up pieces of fur if you don't have a solid piece of the right size. Attach them to the patterns so that the pile lies in the same direction, its height and color are the same or match.

nine

Sew the pieces over the edge with frequent stitches, make sure that no pile gets on the wrong side, lay out the sewn part, break the seam with a wooden mallet. Moisten the fur from the flesh side, straighten the pieces, secure them with the pile outwards on the board with nails, and leave to dry.

ten

Remove the fur from the plywood, put the pattern details on the side of the flesh, circle with chalk, cut out the details of the cap (two details of the cap, four details of the ears, two details of the visor). First, stitch the grooves of the cap, sew the cap, sew on the ears and visor, turn the fur outside and sew in the ribbons.

eleven

Lay the lining fabric obliquely, translate the pattern details, cut, sew, smooth and sew into the hat.

Recommended: