❶ How To Replace The Pads With Your Own Hands

❶ How To Replace The Pads With Your Own Hands
❶ How To Replace The Pads With Your Own Hands

Video: ❶ How To Replace The Pads With Your Own Hands

Video: ❶ How To Replace The Pads With Your Own Hands
Video: Mac Miller - Self Care 2024, March
Anonim
How to replace the pads with your own hands
How to replace the pads with your own hands

Brake pads are parts that directly affect road safety. That is why any motorist needs to know when it is time to change the pads, as well as how to change them correctly. Location: Location: 1

Many foreign cars have special warning systems that inform the owner of the wear of the brake parts. The most modern of them are electronic. They signal worn pads with a special warning light in the cabin.

A more common option is a sound sensor directly on the pads themselves. They are usually made from a steel strip attached to the base of the shoe. As soon as the latter has worn out to the permissible limit, the steel strip begins to touch the brake disc and, at the moment of braking, emits a piercing and very unpleasant squeal.

Critical wear of the pads is indicated by a metallic grinding that appears during braking. If the pads are not urgently replaced, then the increased wear of the brake discs will begin, as well as the loss of the braking properties of the car.

In order to change the pads yourself, you need a regular jack and a standard set of auto-tools. Remove the wheel, using a large screwdriver, spread the brake pads to the sides (the brake piston should return to its original position).

five

Unscrew the bolt securing the brake caliper with a bracket to the guide bushings. There are two bolts on the caliper, which must be unscrewed so that the caliper together with the bracket could be swiveled to the side by turning it on the guide pin.

After that, it is necessary to remove the old pads and replace them with new ones, having previously laid any graphite-containing grease under them. After that, you should install back the damper sheet metal gaskets.

After that, we put the brake caliper in place, tighten the bolt and put the wheel in place. We do the same with the other wheel.

After replacing the brake pads, bleed the brakes. To do this, it is necessary to press the brake pedal several times - this will remove the formed gap between the pads, brake disc and the brake caliper piston.

nine

If you doubt your abilities, then you need to contact a professional car service, where you will quickly and efficiently replace the pads. Remember that braking depends on their quality, and therefore your safety!

Recommended: